Using The Lens Antitheft Screw - Christie LX605 Service Manual

Maintenance

Using the Lens Antitheft screw

This projector provides a Lens antitheft screw to protect the projection lens stolen from a suspicious person.
Mount the Lens antitheft screw by following the instructions below.
Mounting the Lens antitheft screw
Loosen a screw-A on the lamp cover and slide it to
1
open (Fig. 1).
Loosen a screw-B on the prism cover and slide it in
2
the arrow direction (Fig. 2).
Insert the Lens antitheft screw onto the screw hole
3
on the cabinet top and turn it until the lens release
button is locked (Fig. 3).
Close the prism cover and tighten the screw-B, and
4
close the lamp cover and tighten the screw-A.
Check that the lens release button is locked to pro-
tect the projection lens removing.
Note: Be careful not to drop the Lens Antitheft screw
into the opening of the projector when mounting
the screw.
Lens release button
LX505/605 Service Manual
020-000233-01 Rev.1 (12-2009)
Lamp cover
A
Prism cover
-15-
Fig. 1
B
Fig. 2
Lens Antitheft
screw
Fig. 3