Table of Contents
Advertisement
2. Loading Supplies
2.1 Adding Paper/Labels:
The printer can print text, bar codes and graphics on thermal receipt paper. See
"Supply Specifications" for the width, thickness requirements and approved
vendors. Follow these steps to load printer paper.
Press down on the button on the top cover (next to the Extech label) as
shown in
Figure
The paper door will pop open a short way.
Grip either side of the paper door and open – it will open to 180 degrees.
Place the paper roll into the paper supply well. Make sure the paper supply
unwinds from the bottom as indicated below with the thermal side closest to
the print head.
Unroll about 3 inches of paper from the roll and position between the print
head guides.
Close the paper door.
2.2 Tearing Paper:
The printer's paper door acts as a tear bar. Pull one edge of the paper against the
tear bar as indicated, then tear down and across against the tear bar to tear the
paper.
Caution: The tear bar may have sharp edges.
!
4.
L
o
a
d
i
n
g
t
h
e
P
a
p
L
o
a
d
i
n
g
t
h
e
P
a
p
e
r
R
o
l
l
e
r
R
o
l
l
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S2500THS and is the answer not in the manual?
Questions and answers