Turning The Key Tone On And Off - GRE PSR-200U Owner's Manual

To program a weather channel as the priority channel:
1. Press WX.
2. Select the weather channel you want to program as the priority channel.
3. Press FUNC then PRI. P ChAnnEL is displayed momentarily. After P
ChAnnEL appears, PCH flashes and 000.0000 or the previously-stored
frequency appears.
4. Press ENT to store the priority channel and display blinks two times.
Press CLEAR to cancel.
To turn on the priority feature, press PRI during scanning or searching. PRI
appears. The scanner checks the priority channel every 2 seconds and stays
on the channel if there is activity. PCH and the frequency appear whenever
the scanner is set to the priority channel.
To turn off the priority feature, press PRI. PRI disappears.
Notes:
• If you program a weather frequency into the priority channel and the
scanner detects a WX alert tone on that frequency (see "SAME Standby
mode" on Page 27), the scanner sounds the alert tone and ALErt flashes.
Press any key to turn off the alarm.
• Priority does not function when you listen FM radio mode.

TURNING THE KEY TONE ON AND OFF

The scanner is preset to sound a tone each time you press one of its keys.
You can turn the key tone off or on.
1. If the scanner is on, slide POWER to off.
2. Slide POWER to turn on the scanner. Welcome message appears.
3. While Welcome message appears, press 1 to turn on the key tone or 2 to
turn it off.
PSR200U-OM.indd 33
33
2010/02/22 16:24:44