GRE PSR-200U Owner's Manual page 14

S — Appears with 8-digit bar that shows receiving signal strength.
PGM — Appears when you program frequencies into the scanner's
channels.
DLY — Appears when you program a 2-second delay.
ALL CH L-out — Appears when you lock out the all marine channels.
-b- — Appears during service search (Fire/Police, Aircraft and Ham band)
b X Ch-FULL — Appears when you try to enter a frequency during a search
when all displayed bank's channels are full.
b X StorE — Appears when you program the frequency into desired vacant
channel.
CLOnE — Appears when the scanner stays in the clone mode.
-dUPL- — Appears when you try to store a frequency that is already stored
in another channel.
Error — Appears when you make an entry error.
Func — Appears when you press FUNC key to use various functions.
FLo ALL-CL — Appears when you remove all the locked-out frequencies
during a FD/PD, AIR, or HAM band.
L-r — Appears when you review the locked-out frequencies.
L-r EMPty — Appears when the locked-out frequency is empty in the search/
tune.
L-O Fr-FULL — Appears when you try to lock out a frequency during a
search/tune when 100 frequencies are already locked out.
oFF tonE — Appears when you turn the key tone off.
On tonE — Appears when you turn the key tone on.
P — Appears when the scanner is tuned to the priority channel.
PSE — Appears when the scanner pauses the search/tune.
-t- — Appears during a tune mode.
MAr — Appears about 2 seconds when you select marine band.
FIrE — Appears about 1 second when you select FD/PD band.
POLICE — Appears about 1 second when you select FD/PD band.
AIr — Appears about 2 seconds when you select AIR band.
HAM — Appears about 2 seconds when you select HAM band.
14
PSR200U-OM.indd 14 2010/02/22 16:24:42