Battery Charger; Dc To Dc Converter; Battery; Dynamic Bypass - Liebert UPStation GXT 2U User Manual

B C
ATTERY HARGER
The battery charger utilizes energy from the utility power and precisely
regulates it to continuously "float charge" the batteries. The batteries are
being charged whenever the UPStation GXT 2U is plugged in, even when
the UPS is not turned on.
DC DC C
TO ONVERTER
The DC to DC converter utilizes energy from the battery system and
raises the DC voltage to the optimum operating voltage for the inverter.
This allows the inverter to operate continuously at its optimum efficiency
and voltage, thus increasing reliability.
B
ATTERY
The UPStation GXT 2U utilizes valve-regulated, nonspillable, flame retar-
dant, lead acid batteries. To maintain battery design life, operate the UPS
in an ambient temperature of 68°F to 77°F (20°C to 25°C). Optional exter-
nal battery cabinets are available to extend battery run times.
D B
YNAMIC YPASS
The UPStation GXT 2U provides an alternate path for utility power to the
connected load in the unlikely event of a UPS malfunction. Should the
UPS have an overload, overtemperature, or UPS failure condition, the
UPS automatically transfers the connected load to bypass. Bypass opera-
tion is indicated by an alarm and illuminated Bypass LED (other LEDs
may be illuminated to indicate the diagnosed problem). To manually trans-
fer the connected load from the inverter to bypass, press the Standby but-
ton once.
NOTE
The bypass power path does NOT protect the connected
equipment from disturbances on the utility supply.
6