1.8.2
CMOS Clear (CMOS1)
The AIMB-270 motherboard contains a jumper that can erase CMOS data and reset
the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
Table 1.3: CMOS1
Function
*Keep CMOS data
Clear CMOS data
* Default
1.8.3
JLVDS1 and JLVDS2: LCD Power 3.3 V/5 V/ 12 V Selector
Table 1.4: JLVDS1 and JLVDS2: LCD Power 3.3 V/5 V/ 12 V Selector
Closed Pins
JLVDS1
1-2*
2-3
JLVDS1 and JLVDS2
2-2
Default
*
AIMB-270 User Manual
Jumper Setting
1-2 closed
2-3 closed
Result
For 3.3 V LVDS Panel
For 5 V LVDS Panel
For 12 V LVDS Panel
for 3.3V LVDS panel
JLVDS1
for 5V LVDS panel
JLVDS1
JLVDS2
for 12V LVDS panel
JLVDS1
8