Atx Power Connector (Eatxpwr1, Eatxpwr2) - Advantech AIMB-270 User Manual

Intel core i7/i5celeron µfc-pga989 mini-itx with vga/2dvi/lvds, 6 com, dual lan, pcie x 16

Hide thumbs Also See for AIMB-270:

Table of Contents

2.14

ATX Power Connector (EATXPWR1,

EATXPWR2)

This connector is for an ATX Micro-Fit power supply. The plugs from the power sup-

ply are designed to fit these connectors in only one direction. Determine the proper

orientation and push down firmly until the connectors mate completely.

Note!

Please do connect the EATXPWR2 connector with the PSU ATX

12V 4-pin connector.

For a fully configured system, we recommend that you use a power

supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or

later version) and provides a minimum power of 180 W.

AIMB-270 User Manual

Table of Contents