Graphics; Ethernet Lan; Industrial Features; Mechanical And Environmental Specifications - Advantech AIMB-270 User Manual

1.3.4

Graphics

! Controller: Intel® HD Graphics
! Display memory: 1 GB maximum shared memory with 2GB and above system
memory installed
! DVI: Supports DVI up to resolution 1920 x 1200 @ 60Hz refresh rate
VGA: Supports VGA up to resolution 2048 x 1536 @ 75Hz refresh rate
!
LVDS: Supports LVDS up to resolution 1920 x 1200
!
1.3.5

Ethernet LAN

! Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus
which provides 500 MB/s data transmission rate
! Controller: LAN1: Intel 82577LM; LAN2: Intel 82583v
1.3.6

Industrial features

! Watchdog timer: Can generate a system reset. The watchdog timer is pro-
grammable, with each unit equal to one second or one minute (255 levels)
1.3.7

Mechanical and environmental specifications

! Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)
! Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
! Humidity: 5 ~ 95% non-condensing
! Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb
! Power consumption:
Intel® Core™ i5-520M 2.4 GHz, 3 MB L2 cache, 2 pcs 4 GB DDR3 1066 MHz,
+5 V @ 3.42 A, +3.3 V @ 1.1 A, +12 V @ 1.19 A, 5 VSB @ 0.5 A, -12 V @ 0 A
Measure the maximum current value which system under maximum load (CPU:
Top speed, RAM & Graphic: Full loading)
! Board size: 170 mm x 170 mm (6.69" x 6.69")
! Board weight: 0.365 kg
1.4

Jumpers and Connectors

Connectors on the AIMB-270 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.

Table 1.1: Jumpers

Label
JFP1
JFP2
CMOS1
PSON1
JWDT1+JOBS1
JCASE1
JLVDS1
JLVDS2
Function
Power switch/HDD LED/SMBus/Speaker
Power LED and Keyboard lock
CMOS clear (Default 1-2)
AT(1-2) / ATX(2-3) (Default 2-3)
Watchdog Reset and OBS Alarm
Case Open pin header
Voltage 3.3V/5V selector for LVDS1 connector (Default 1-2, 3.3V)
Voltage 12 V selector for LVDS1 and LVDS2 connector
3 AIMB-270 User Manual