Web-Based Switch Configuration; Logging Onto Web Manager; Introduction; Logging Onto The Web Manager - D-Link DGS-1510 Series Hardware Installation Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide

5. Web-based Switch Configuration

Introduction

Logging onto the Web Manager

Web-based User Interface
Introduction
Most software functions of the Switch can be managed, configured, and monitored via the embedded
Web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through
a standard browser, such as Internet Explorer (version 5.5 and later), Mozilla Firefox (version 3 and later),
Chrome (version 5 and later), or Safari (version 4 and later). The browser acts as a universal access tool
and can communicate directly with the Switch using the HTTP protocol.
Logging onto the Web Manager
To begin managing the Switch, simply run the browser installed on your computer and point it to the IP
address you have defined for the device. The URL in the address bar should be in the format of
http://123.123.123.123, where the numbers 123 represent the IP address of the Switch.
This opens the user authentication window, as seen below. The following example is from 10.90.90.90.
Leave the User Name and Password fields blank and click Login. This will open the Web-based user
interface. The Switch management features available in the web-based manager are explained below.
NOTE: The factory default IP address is 10.90.90.90.
Figure 5–1 Enter Network Password Window
33