Front-Panel Components - D-Link DGS-1510 Series Hardware Installation Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
•
Supports Port-based Network Access Control (PNAC) better known as 802.1X. This feature
includes Local and RADIUS databasis, Port-based Access Control, and MAC-based Access
Control (MAC).
•
Supports Web-based Access Control (WAC).
•
Supports Japanese Web-based Access Control (JWAC).
•
Supports Guest VLAN.
•
Supports 15 User Account Privilege Levels.
•
Supports Compound Authentication.
•
Supports Link Layer Discovery Protocol (LLDP) with LLDP-MED.
•
Supports Accessibility using multiple interfaces like the Command Line Interface (CLI), Web-
based Graphical User Interface (Web-based GUI), and more.
•
Supports Telnet Server and Client from IPv4 and IPv6.
•
Supports Trivial File Transfer Protocol (TFTP) Client.
•
Supports Simple Network Management Protocol (SNMP) version 1, 2c, and 3. Also supports
SNMP Traps.
•
Supports DHCP Client.
•
Supports Dynamic Host Configuration Protocol (DHCP) Relay.
•
Supports Traps and Logs.
•
Support Multiple Images.
•
Supports Password Encryption.
•
Supports Simple Network Time Protocol (SNTP).
•
Support Power Saving using the Link Status Mode.
•
Support Time-based Power-over-Ethernet (PoE).
•
Supports IEEE 802.3az compliance.
•
Supports Optical Transceiver Digital Diagnostic Monitoring (DDM).
•
Supports D-Link Discovery Protocol (DDP).
•
Supports MIBs like MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like MIB,
802.3 MAU MIB, 802.1p MIB, RADIUS Authentication Client MIB, Ping MIB, L2 Specific MIB,
Private MIB, Entity MIB, and ZoneDefense MIB.

Front-Panel Components

The Front Panel of the Switch features a variety of Ports and LED Indicators that will be discussed in
detail in this section. Also located on the front panel of the Switch is a Reset button, that can be pressed
and holded for 5 seconds to perform a factory reset on the Switch after which the Switch will reboot. This
will clear all the software modifications done on the Switch to their factory default settings.
Figure 1–1 Front panel view of a DGS-1510-20 Switch
11