Connect To A Network Backbone Or Server - D-Link DGS-1510 Series Hardware Installation Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide
Figure 3–2 Switch to Switch Connection

Connect to a Network Backbone or Server

The Combo Copper/SFP ports are ideal for connecting a network backbone, server or server farm to the
Switch. The copper ports operate at a speed of 10/100/1000Mbps in half-duplex or full-duplex mode. The
fiber-optic ports can operate at both 100/1000Mbps in full-duplex mode. The Link LED turns green when
a connection is made.
Figure 3–3 Server to Switch Connection
25