ATCOM IP2G4A User Manual page 13

IPPBX IP2G4A User Manual
Analog phone is available to make calls once connected to the corresponding FXS port, IPPBX configures FXS
extension automatically when FXS module is detected and they can't be deleted.
NOTE: FXS extension number range is defined in PBX Settings -> Options -> Extension Preference, changing
it can change the FXS extension number.
1) General
Extension
Extension number, i.e. 6101, it is associated with this particular user / phone.
Port
The analog port bound with extension.
Name
A character-based name for this extension, i.e. 'Bob Jones'.
Caller ID
CID showed in the other's phone during a call, default is Extension.
2) Voice Mail
Enable Voice Mail
Check this option to enable voice mail account for the extension. Enabled by default.
Voice Mail Access PIN Code
Password for accessing this voice mail account, default is 123456. It's also the password for extension to login his
administration web page.
3) Mail Setting
Enable Sending Voice Mail
Check this option to enable PBX send new voicemail to Email address below as an attachment.
Email Address
The Email address that new voicemail will be send to when Enable Sending Voice Mail is enabled and PBX
settings -> SMTP settings is right set.
4) Volume Settings
Rxgain
Adjust the volume sent to FXS extension. There are 3 options: 20%,60%,100%.
Txgain
Adjust the volume sent out by FXS extension. There are 3 options: 20%,60%,100%.
5) Flash
Hook Flash Detection Time
Sets the amount of time, in milliseconds, that the hook-flash must remain depressed in order for IPPBX to
consider such an event a valid flash event. The default value of it is 1250 ms and it can be configured in 1 ms
increments.
~ 12 ~
ATCOM TECHNOLOGY CO., LIMITED