Windows Vista Users - Roland Sonar V-Studio 100 Getting Started

Installation and Registration

Windows Vista Users

1.
Disconnect all USB cables (except those for a USB keyboard and/or USB mouse, if used), then start
up Windows.
2.
Close all currently running software (applications).
Also close all windows that are open. If you are using software such as antivirus programs, be sure to close these
programs as well.
3.
Insert the included "SONAR V-STUDIO 100 Driver CD-ROM" into your computer's CD/DVD-ROM
drive.
4.
Select "Start-Run" and enter "d:\drivers\vista32\setup.exe" to start the driver installer.
(where d:\ is your disc drive).
* If a message informs you that "Driver installation must be performed by an administrator," you must log on to
Windows as a user whose Account Type is Administrator, and then perform the installation.
5.
A confirmation screen regarding User Account Control appears, click [Continue].
6.
The message "VS-100 Driver will be installed on your computer." appears. Click [Next].
* If any other message appears, follow the directions of the message.
7.
Click [Next] to begin installation.
8.
If a dialog box regarding Windows Security appears, click [Install].
9.
The message "Ready to install the driver." appears.
Leave the screen open; do not close it at this point.
* If any other message appears, follow the directions of the message.
8