Record Your Performance - Roland Sonar V-Studio 100 Getting Started

7. Record your performance.

Press the
Press the
Press the
If you're not satisfied with your performance, you can easily re-record it. After you've stopped recording but before
you've performed any other operation, hold down the "Ctrl" key of your computer keyboard and press "Z." The
waveform that had been displayed will disappear. Since you can re-record as easily as this, you can feel free to try as
many times as you like until you've captured a performance you're happy with.
The sound of playback or recording may be interrupted if you connect or disconnect USB memory or another
USB device or turn the power on/off during these operations.
Using a USB-connected hard disk may decrease the hard disk data transfer rate due to congestion on the USB
data bus. Do not use a USB-connected hard disk to save the audio data that you are playing or recording.
Dropouts in playback or recording may occur immediately after the system has started up or resumed from the
sleep state. Please wait for a time before you perform playback or recording.
record button to start recording.
stop button to stop recording.
play button to hear the recorded result.
Initial Settings
39