Roland Sonar V-Studio 100 Getting Started page 11

6.
Click [Next] to begin installation.
* If the "Software Installation" dialog box appears, click [Continue Anyway] to proceed with the installation.
If the "Driver Signing Options" setting was not set to "Ignore," a "Hardware Installation" dialog box
appears.
A dialog box with a "!" symbol appears.
1.
Click [Continue Anyway] and continue the installation.
A dialog box with a "x" symbol appears.
1.
Click [OK].
2.
When the "Found New Hardware Wizard" appears, click [Finish].
3.
Return to step 1 (p. 10) and re-install the driver from the beginning of the
procedure.
4.
The message "Ready to install the driver." appears.
Leave the screen open; do not close it at this point.
* If any other message appears, follow the directions of the message.
Installation and Registration
11