Windows 7/Windows Vista Users; Installing The Driver - Roland OCTA-CAPTURE Owner's Manual

Windows 7/Windows Vista Users

Installing the Driver

Steps to be performed on the OCTA-CAPTURE keyboard itself are marked by a
Operation of the OCTA-CAPTURE
until you are told to do so.
* The example screen shots included here are taken from Windows 7 .
1. With the OCTA-CAPTURE disconnected, start up Windows .
Disconnect all USB cables from your computer, with the exception of those for a USB keyboard and
USB mouse (if used).
2. Close all currently running software .
3. Insert the included OCTA-CAPTURE CD-ROM into your DVD-ROM drive .
When the auto-play dialog box appears, click [Open folder to view files].
4. In the appropriate folder within the CD-ROM, double-click the [Setup] icon to start up
the installer .
OS
Windows 7:
Windows Vista:
Windows 7 64-bit edition:
Windows Vista 64-bit edition:
If you get a message saying "The operating system you are using is not supported" or "The version
of this file is not compatible with the version of Windows you're running, " or if you don't know the
version of your operating system, check your operating system as described below.
If "System type" indicates "64-bit Operating System, " you have the 64-bit version.
Windows 7 users
Open "Control Panel, " click "System and Security, " and then click [System].
If the Control Panel shows the icon view, click [System] icon.
Windows Vista users
Open "Control Panel, " click [System and Maintenance], and then click [System].
If the Control Panel shows the classic view, double-click the "System" icon.
symbol. Don't connect the OCTA-CAPTURE to your computer
Installer
Open the folders [Driver] and then [Win7]
Open the folders [Driver] and then [Vista]
Open the folders [x64Driver] and then [Win7]
Open the folders [x64Driver] and then [Vista]
15