Adjust The Level - Roland Sonar V-Studio 100 Getting Started

Initial Settings

4. Adjust the level

If you're recording from a device connected to INPUT 1L or INPUT 2R, adjust the levels as follows.
In order to record with the best possible audio quality, adjust the input level so that SONAR V-STUDIO 100's level
meter does not light even during the loudest passages.
1.
Press SONAR V-STUDIO 100's [DISPLAY] button.
The level meter appears in the display. If a different screen is shown, press the [DISPLAY] button once again.
2.
If your microphone or guitar is connected to the INPUT1L or 2R jacks, use SONAR V-STUDIO 100's front
panel [SENS] knob to adjust the input level.
* The input level for a device connected to INPUT 3–6 must be adjusted using the controls of the device itself. This level
cannot be adjusted on the SONAR V-STUDIO 100.
36