Roland Sonar V-Studio 100 Getting Started page 9

10.
Perform the following procedure before you connect the SONAR V-STUIDO 100 hardware to your
computer.
1. Minimize the SONAR V-STUDIO 100 hardware's [MAIN MIX] knob.
2. Connect the included AC adaptor to the SONAR V-STUDIO 100 hardware.
Power Cord
to Power Outlet
3. Turn on the POWER switch of the SONAR V-STUDIO 100 hardware.
4. Use the included USB cable to connect the SONAR V-STUDIO 100 hardware to your computer.
USB connector
AC Adaptor
USB cable
(Included)
Installation and Registration
DC IN
Computer
9