Removing and replacing an SFP transceiver
Figure 14
FIGURE 14
Refer to the PRIMERGY BX900 S1 Basic Unit Operating Manual to remove and replace the
Embedded Switch Module from the chassis.
.
ATTENTION
If you are not replacing the Embedded Switch Module, use a filler panel to fill the empty slot to
maintain proper air flow. Do not leave the slot empty.
Brocade 5450 Hardware Reference Manual
53-1001266-02
illustrates the process for removing an SFP from a port.
Removing an SFP from a Port
Cable
Release
1
2
Removing and replacing an SFP transceiver
Bale
SFP
3
SFP
4
4
39