A
Processor and memory specifications
Other Access Gateway defaults
Table 7
TABLE 7
Feature
Automatic Failover
Automatic Failback
APC policy
Group policy
ADS policy
Processor and memory specifications
The processor and memory installed in the Embedded Switch Module are shown in
TABLE 8
Memory Type
PowerPC 440EPX processor
SDRAM
Boot flash
Compact flash
Weight and physical dimensions
Table 9
TABLE 9
Dimension
Height
Width
Depth
Weight
42
shows the default settings for Access Gateway features.
Access Gateway defaults
Memory specifications
lists the weight and physical dimensions of the Embedded Switch Module.
Embedded Switch Module specifications
Default setting
Enabled on all N_ports
Enabled on all N_ports
Disabled
Enabled
Disabled
Value
667 MHz
512 MB DDR2 - for system memory at
64 bits wide with 8 ECC bits at 166
MHz.
4 MB - used during system boot only
and is field upgradable with password
protection.
512 MB - used for firmware
downloading and logging.
Measurements
27.94 mm (1.1 in)
192.84 mm (7.5921 in)
275.34 mm (10.8402 in)
1.31 kg (2.9 lbs) - without media
Brocade 5450 Hardware Reference Manual
Table
8.
53-1001266-02