Hardware Description; Front Panel - Fujitsu PRIMERGY BX900 Hardware Reference Manual

1

Hardware Description

•
TABLE 1
Hardware Description
This section describes the physical Embedded Switch Module as shipped from the factory. For
specifications, such as installed memory, weight and physical dimensions, facility requirements,
architectural specifications, and regulatory compliance, refer to
Module specifications"

Front panel

Externally accessible ports and LEDs are on the port side of the Embedded Switch Module. The
front panel faces out when the Embedded Switch Module is inserted into the I/O bay of the Blade
Server chassis.
interpretations of these LEDs, see
Access the I/O module handle at the front of the port side of the Embedded Switch Module. By
pressing the handle's release latch, you can open the handle to remove and insert the unit from
the Blade Server chassis.
FIGURE 1
2
1. Module locator
2. Health indicator
3. Module status indicator
4. Port status indicators (See
The Embedded Switch Module has a Reset button. The Reset button is a small, recessed
micro-switch that is accessed by inserting a pin (or an object of similar size) into the small hole.
Depress the Reset button for up to five seconds to reboot the Embedded Switch Module.
4
For static POD, Table 1 shows the 14 base internal and external ports that are licensed. In
static mode, you cannot move licenses from one port to another.
Ports available with Static POD
Port Licensing External Ports
Base 19, 20, 21, 22
POD 0, 23, 24, and 25
Figure 1 details the front panel. For a complete description of the locations and
Front panel view
1 4
3
Internal Ports
1 through 10
11 through 18
"Interpreting LED activity"
"Interpreting LED activity"
Appendix A, "Embedded Switch
on page 37.
on page 37.)
Brocade 5450 Hardware Reference Manual
53-1001266-02