3
Setting the Embedded Switch Module IP address
1. Click Connection Blades Status in the middle pane to expand the list.
FIGURE 8
2. Select the FC connection blade from the Connection Blades Status list, shown in
3. Click the Configuration tab in the middle pane.
4. Scroll down to the Management Port Settings section, shown in
FIGURE 9
24
The current FC connection blade information, shown in
PRIMERGY BX900 Management Blade application connection blade status
Information for the selected FC connection blade displays in the middle pane.
The Configuration dialog box displays.
PRIMERGY BX900 Management Blade application - Service Port Settings
Figure
8, displays.
Figure
9.
Brocade 5450 Hardware Reference Manual
53-1001266-02
Figure
8.