Ip Dhcp Snooping Information Option Allow-Untrusted - Cisco Catalyst 3550 Command Reference Manual

ip dhcp snooping information option allow-untrusted

ip dhcp snooping information option allow-untrusted
Use the ip dhcp snooping information option allow-untrusted global configuration command on an
aggregation switch to configure it to accept DHCP packets with option-82 information that are received
on untrusted ports that might be connected to an edge switch. Use the no form of this command to
configure the switch to drop these packets from the edge switch.
Syntax Description This command has no arguments or keywords.
Defaults
The switch drops DHCP packets with option-82 information that are received on untrusted ports that
might be connected to an edge switch.
Command Modes
Global configuration
Command History Release
12.1(22)EA3
Usage Guidelines In Cisco IOS Release 12.1(22)EA3 and in Cisco IOS Release 12.2(25)SEA or later, you might want an
edge switch to which a host is connected to insert DHCP option-82 information at the edge of your
network. You might also want to enable DHCP security features, such as DHCP snooping, IP source
guard, or dynamic Address Resolution Protocol (ARP) inspection, on an aggregation switch. However,
if DHCP snooping is enabled on the aggregation switch, the switch drops packets with option-82
information that are received on an untrusted port and does not learn DHCP snooping bindings for
connected devices on a trusted interface.
If the edge switch to which a host is connected inserts option-82 information and you want to use DHCP
snooping on an aggregation switch, enter the ip dhcp snooping information option allow-untrusted
command on the aggregation switch. The aggregation switch can learn the bindings for a host even
though the aggregation switch receives DHCP snooping packets on an untrusted port. You can also
enable DHCP security features on the aggregation switch. The port on the edge switch to which the
aggregation switch is connected must be configured as a trusted port.
Note Do not enter the ip dhcp snooping information option allow-untrusted command on an aggregation
switch to which an untrusted device is connected. If you enter this command, an untrusted device might
spoof the option-82 information.
Catalyst 3550 Multilayer Switch Command Reference
2-156
ip dhcp snooping information option allow-untrusted
no ip dhcp snooping information option allow-untrusted
Modification
This command was introduced.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
OL-8566-02