Cisco Catalyst 3550 Command Reference Manual page 341

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
This is an example of output from the show access-lists hardware counters command:
Switch# show access-lists hardware counters
Input Drops:
Output Drops:
Input Forwarded:
Output Forwarded:
Input Bridge Only:
Bridge and Route in CPU: 0 matches (0 bytes)
Route in CPU:
Related Commands Command
access-list
ip access list
mac access-list extended
OL-8566-01
10 permit host 1100.bb00.00cc host 2234.0123.2345
0 matches (0 bytes)
0 matches (0 bytes)
234781 matches (19942889 bytes)
0 matches (0 bytes)
0 matches (0 bytes)
160 matches (10344 bytes)
Description
Configures a standard or extended numbered access list on the switch.
For syntax information, select Cisco IOS Release 12.2 Configuration
Guides and Command References > Cisco IOS IP Command
Reference, Volume 1 of 3: Addressing and Services, Release 12.2 >
IP Services Commands.
Configures a named IP access list on the switch. For syntax
information, select Cisco IOS Release 12.2 Configuration Guides and
Command References > Cisco IOS IP Command Reference, Volume
1 of 3: Addressing and Services, Release 12.2 > IP Services
Commands.
Configures a named or numbered MAC access list on the switch.
Catalyst 3550 Multilayer Switch Command Reference
show access-lists
2-315