Cisco Catalyst 3550 Command Reference Manual page 104

dot1x
Examples This example shows how to enable IEEE 802.1x authentication globally on a switch:
Switch(config)# dot1x system-auth-control
You can verify your settings by entering the show dot1x privileged EXEC command.
Related Commands Command
dot1x guest-vlan
dot1x port-control
show dot1x
Catalyst 3550 Multilayer Switch Command Reference
2-78
Description
Enables and specifies an active VLAN as an IEEE 802.1x guest VLAN.
Enables manual control of the authorization state of the port.
Displays IEEE 802.1x statistics, administrative status, and operational status
for the switch or for the specified interface.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
OL-8566-02