Show Class-Map - Cisco Catalyst 3550 Command Reference Manual

show class-map

show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
Syntax Description class-map-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(4)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-any dscp_class
Match ip dscp 9
Class Map match-all vlan_class
Match vlan 10 20-30 40
Match class-map dscp_class
Related Commands Command
class-map
match (class-map configuration)
Catalyst 3550 Multilayer Switch Command Reference
2-322
show class-map [class-map-name] [ | {begin | exclude | include} expression]
(Optional) Display the contents of the specified class map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
Description
Creates a class map to be used for matching packets to the class
whose name you specify.
Defines the match criteria to classify traffic.
OL-8566-01