Cisco Catalyst 3550 Command Reference Manual page 529

Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
Table 2-31 show vtp status Field Descriptions (continued)
Field
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 Digest
Configuration Last
Modified
Related Commands Command
clear vtp counters
vtp (global configuration)
vtp (privileged EXEC)
vtp (VLAN configuration)
OL-8566-01
Description
Name that identifies the administrative domain for the switch.
Displays whether pruning is enabled or disabled. Enabling pruning on a VTP server enables
pruning for the entire management domain. Pruning restricts flooded traffic to those trunk links
that the traffic must use to access the appropriate network devices.
Displays if VTP version 2 mode is enabled. All VTP version 2 switches operate in version 1
mode by default. Each VTP switch automatically detects the capabilities of all the other VTP
devices. A network of VTP devices should be configured to version 2 only if all VTP switches
in the network can operate in version 2 mode.
Displays whether VTP traps are sent to a network management station.
A 16-byte checksum of the VTP configuration.
Displays the date and time of the last configuration modification. Displays the IP address of the
switch that caused the configuration change to the database.
Description
Clears the VTP and pruning counters.
Configures the VTP filename, interface name, domain name, and mode.
Configures the VTP password, pruning, and version.
Configures the VTP domain name, password, pruning, and mode.
Catalyst 3550 Multilayer Switch Command Reference
show vtp
2-503