Cisco Catalyst 3550 Command Reference Manual page 512

show tcam qos
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
You can use the show tcam qos tcam-id entries [entry-id] command to display all QoS entries including
per-port per-VLAN QoS information. You also can use the show tcam qos tcam-id port-labels
[label-id] vlan-labels [label-id] command to display per-port per-VLAN TCAM entries with both the
port label and the VLAN label.
These displays provide information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Examples
This is an example of output from the show tcam qos masks command for TCAM 2:
Switch> show tcam qos 2 masks
Number of active masks : 4
Mask Index : 252
F4 00 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 00 00
Mask Index : 253
F4 00 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 00 00
Mask Index : 254
F0 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00
Mask Index : 255
F0 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00
This is an example of output from the show tcam qos entries command for TCAM 1:
Switch> show tcam qos 1 entries
No active labels/entries
This is an example of output from the show tcam qos statistics command for TCAM 1:
Switch> show tcam qos 1 statistics
QoS TCAM#1: Number of active labels: 0
QoS TCAM#1: Number of masks
QoS TCAM#1: Number of entries allocated:
Catalyst 3550 Multilayer Switch Command Reference
2-486
Chapter 2 Catalyst 3550 Switch Cisco IOS Commands
allocated: 4, available:
1, available: 3327
412
OL-8566-01