Control Options
Oven Control Lockout
The oven operation controls - Bake, Convect, Broil, and Clean
- can be locked in the "OFF" position. The Timer and Clock
controls can always be used regardless of the lockout.
If an oven function is currently being used, the controls cannot
be locked off.
To Set Controls
1. Press and hold the COOK TIME pad and the STOP TIME
pad at the same time for several seconds.
•
The indicator word "OFF" will appear and remain in
the display for 15 seconds.
•
If an oven function pad is pressed while controls are
locked off, the indicator word "OFF" will reappear
in the display for 15 seconds.
To cancel: Press and hold the COOK TIME pad and the
STOP TIME pad at the same time for several seconds. The
indicator word "OFF" will appear briefly and then disappear.
Adjusting Oven Temperature
If you think the oven should be hotter or cooler, you can adjust
it yourself. To decide how much to change the thermostat, set
the oven temperature 25 F higher or lower than the temperature
in your recipe, then bake. The results of the "test" should give
you an idea of how much to adjust the thermostat.
To adjust the thermostat:
1. Press the BAKE pad.
2. Enter 500 by pressing the number pads "5, 0, 0".
3. Press and hold the BAKE pad for several seconds
until 00 appears in the display.
•
If the oven temperature was previously adjusted,
the
played. For example, if the oven tem-
perature was reduced by 15 , the display will show -
15 .
4. Press the appropriate number pads to select the tem-
perature change desired.
•
The oven temperature can be increased up to
35 (+35 ) or reduced by as much as 35 (-35 )
in 5 increments.
•
Pressing the BROIL pad will change the - sign
to a positive number or back to a negative number.
5. When you have made the adjustment, press the
CANCEL pad and the time of day will reappear in the
display. The oven will now bake at the adjusted
temperature.
It is not necessary to readjust the oven temperature if
there is a power interruption. This adjustment will not
affect broil or clean temperatures.
NOTE: Do not change the temperature setting more than
10 at a time before testing the oven.
6
change will be dis-