CLOCK AND OVEN CONTROL
The electronic clock and oven control on your
Maytag wail oven is used for the time-of-day
Press this pad to cancel all operations except the
clock, timer, bake, broil, delay start and self-
time-of-day clock and timer. If yon are ever
clean functions. A beep will sound each time a
unsure if you've programmed
function pad is pressed. At the end of an
correctly, press tile CANCEL pad and start over.
operation, consecutive beeps will sound.
The display on the control will blink when power
is first supplied to the wall oven or if there is a
Turn this knob in either direction to enter the
power failure. Once the time-of-day clock has
time or temperature
desired. This knob is also
been set (see Setting the Clock, page 5), the
used to select Hi or Lo broil.
display will stop blinking.
The timer can be set from 5 seconds to 9 hours,
50 minutes. It will count down by minutes (when
set for i hour or more time) or seconds (when
set for less than I hour). See page 5 for
instructions on setting the timer.
Use this pad to set the time-of-day clock. For
The following pads and knobs are found on your
instructions to do this, see page 5.
Maytag electronic clock and oven eontroh
You may also press this pad to recall the current
time-of-day. For example, if the timer is
counting down in the display, press the CLOCK
pad to return the current time to the display.
The timer will continue to eonnt down and a
signal will sound when the time ex_pires.