Maytag MEW6627 User Manual page 18

Before You Call for Service
Oven baking results
are less than expected.
Baking results differ
from previous oven.
The cooling fan continues
to operate after the oven
has been turned off.
A fan sound
can be heard.
Fault Codes
•the pans being used may not be of the size or material recommended for best results.
(See "Cooking Made Simple" booklet).
•there may not be sufficient room around sides of the pans for proper air circulation
in the oven.
•check instructions for preheating, rack position and oven temperature.
•check oven temperature when convection baking. Decrease conventional baking
temperatures by 25 F.
• oven thermostat calibration may differ between old and new ovens. Follow recipe
and use the directions in this guide before calling for service since the calibration
on the previous oven may have drifted to a too high or too low setting. (See p. 6 -
Adjusting Oven Temperature.)
• this is normal. The fan will automatically shut off when the oven is cooled.
• this is the cooling fan and is normal. The fan will continue to run after use until
the oven cools.
• fault codes are shown in the display as "F" and a number. If a fault code appears in
the display and beeps sound, press the CANCEL pad. If the fault code and beeps
continue after pressing cancel, disconnect power to the wall oven. Wait a few min-
utes, then reconnect power to the oven. If the fault code and beeps still continue,
disconnect power to the wall oven and call an authorized servicer.
• if the oven is heavily soiled, excessive flare-ups may result in a fault code during a
clean cycle. Press CANCEL pad and allow the oven to cool for one hour, then reset
the clean cycle. If the fault code and beeps still continue, disconnect power to the
appliance and call an authorized servicer.
17
(continued)