Table of Contents
Advertisement
Other field values on the toolbar show the Active (or ID) of the currently selected cursor, and its Absolute and
Relative positions.
When Markers are turned on, all of the cursors present in the Digital Editor are listed inside the Marker screen.
The Master Cursor is the one labeled with the following icon.
Relative positions are calculated from the master cursor position.
The master cursor automatically moved during a data search operation to show relative results.
Change the master cursor by selecting the new cursor in the marker window and clicking the Master Cursor icon
in the Digital Editor toolbar.
Note: In the Digital Waveform Editor window, the master cursor is shown in blue while the other cursors are
shown in yellow.
Marker screen columns show the progressive cursor identifiers, the absolute time position (the time distance
between the cursor position and the start of the acquisition) and the relative time position (the time distance
between the cursor and the master cursor). Any time one of the cursors is moved, all the values are
automatically updated and shown.
The following functions are used on Cursors
• The Add button puts a new cursor in the visualization area.
• The Remove button eliminates the cursor selected in the Marker screen.
• Move a cursor by clicking and dragging a selected cursor.
• To remove all cursors by clicking the Clear all markers button.
918221 RevA
Getting Started Manual
69
Advertisement
Table of Contents
