Data Editor - LeCroy ArbStudio Manual

ArbStudio
Random node values can be generated for each grid interval, a specified time, or at fixed intervals.
• Copy Waveform.
Select the entire waveform clicking on the signal/bus name on the left column or select a portion of it
with mouse selection.
Press the Copy Waveform button to copy the waveform.
• Paste Waveform.
Paste the copied waveform into a selected area of the graph (mouse selection) or from the start of
another waveform.

Data Editor

The Data Editor can also be used to edit signal/bus values. Data is visualized numerically in columns when using
the Data Editor. Selections made in the Data Editor are also shown on the Digital Waveform Editor directly
above it.
The Data Editor contains the following two additional columns:
• Samples ‐ Contains the progressive number of the samples generated.
• Time ‐ Contains the progressive absolute time of every sample.
102
918221 RevA