Setup Examples And Common Tasks Overview - LeCroy ArbStudio Manual

ArbStudio
6. Device Status Tree ‐ Lists various channel/pod instrument properties such as sampling rate, channel type,
and voltage level.
• Type ‐ Shows the channel functionality (Arbitrary, DDS, Digital Pattern).
• Waveform ‐ In Arbitrary mode, it shows the current waveform generated by the instrument.
• Modulating ‐ In DDS mode, it shows the phase or the frequency of the modulating signal.
• Voltage Level ‐ Displays the Pod voltage level.
• Sample Rate ‐ The Sample rate of the Digital Pattern Generator.
7. Status Bar ‐ This are of the screen provides channel/pod run mode status information as follows.
• Initializing ‐ The software is loading the firmware into the instrument.
• Ready ‐ The instrument is ready to start.
• Running ‐ The ArbStudio hardware is running.
• Stopped ‐ The instrument is stopped.
• Demo ‐ The software is in demo mode.
PLEASE NOTE THE FOLLOWING:
• When you press the Run/Stop button, the output log displays the operation list the software is
performing as it loads the waveforms and settings into the instrument. If any operations cause an error or
a problem in the sequencer while loading, the log notifies you.
• All of the panels are dockable; meaning they snap into convenient screen positions adjacent to other
panels. Move individual panels by clicking the panel's top side, holding, and dragging with your mouse.

Setup Examples and Common Tasks Overview

These examples provide a quick way to learn the following standard ArbStudio signal setups and common tasks.
22
918221 RevA