introduction
REAR VIEW
Video output terminal : Sends video signal and connects to the video input terminal of
Auto iris lens selection switch : Please change the mode to DC or VIDEO depending
Setting button:
• SETUP button : Displays the menu on the screen and uses enter sub menu.
• Up&Down button : Used to move the cursor up or down in the menu screen.
• Left&Right button :Used to move the cursor left or right in the menu screen.
Power input terminal : Connects to the power appropriate to each model.
Power lamp : Lights up when the correct power is supplied to the camera.
12_ introduction
the monitor.
on the type of auto iris lens being used.
* High Voltage Type
(SCB-1000PH)
L
L
le