Samsung SCB-1000 User Manual page 26

camera operation
5) When a name has been chosen, please
select a position for the name display.
Please move the cursor onto 'POS' and
then press the SETUP button.
The name will appear at the top left hand
corner.
Please find the position you wish to
display the name by using the 4 directional buttons, and then press the
SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
COLOR (Electronic DAY & NIGHT) :
- AUTO : This camera has a function which electronically changes to the
appropriate mode for daytime or night-time. The COLOR mode is
operated for daytime, and it converts to BW mode for night-time.
- ON : The color mode is selected electronically.

If AGC is OFF, you can´t select AUTO mode.

When an infrared light is used, there may be a problem with focusing and COLOR (DAY & NIGHT).
SYNC :
Two SYNCHRONIZATION modes are
available INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, it synchronizes
the video signal between cameras without
a synchronous generator. The line-lock
synchronization is only used in the areas of
60Hz (NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization
- LL : External line-lock synchronization
If you choose 'LL', you can adjust the desired phase. Press the SET
button.
You can adjust the desired phase from 0 to 359.

When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).

When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).

'Sync.' mode is fi xed to 'INT' in DC 12V input power.
26_ camera operation
FRONT DOOR
SYNC
PHASE 0