Overview; Installation; Lens; Rear View - Samsung SDC-435 User Manual

Sdc-435 series ultra high resolution camera
Table of Contents

Advertisement

Overview

Rear View

7
8
7 ......
P ower lamp : Lights up when the correct power is supplied to the camera.
Function Setup Button
8 ......
•SETUP button : Displays the menu on the screen and uses enter sub menu.
•Up&Down button : Used to move the cursor up or down in the menu screen.
•Left&Right button : Used to move the cursor left or right in the menu screen.
9 ......
V ideo output terminal :
Sends video signal and connects to the video input terminal of the monitor.
Power input terminal : Connects to the power appropriate to each model.
❿ ...

Installation

LENS

The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
Notes
• T o use the functions of this camera effectively it is recommended that a DC type Auto Iris
lens is used.
• K eep the lens surface clean, if it becomes contaminated with dirt or fingerprints the
picture quality suffers.
COLOR CCD CAMERA
9
*High Voltage Type
10
User Guide
When Using Auto Iris Lens
1. Strip the insulation of the auto iris lens
cable 8mm from the end.
8mm
3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the
connector pin of the plug.
LENS
Pin No.
DC
VIDEO
No.1 Pin
Damping -
Red (power)
No.2 Pin
Damping +
NC
No.3 Pin
Drive +
White (video signal)
No.4 Pin
Drive -
Black (GND)
4. Please replace the auto iris lens connection plug cover and take off the CCD protection
cap, and then attach the auto iris lens to the camera by
screwing it in clockwise.
5. Please insert the connection plug that is connected to
the auto iris lens cable into the auto lens connector,
which is located on the side of the camera.
When using a C-Mount lens
Please take off the CCD protection cap and attach the C-Mount lens to
the camera by screwing it in clockwise.
COLOR CCD CAMERA
Installation
2. Strip the insulation of the core of the auto
iris lens cable to expose a 2mm length.
2mm
Lens cable
Connector
No.3 Pin
No.1 Pin
No.4 Pin
No.2 Pin
C-mount adaptor
11
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdc-435ndSdc-435nSdc-435pdSdc-435pSdc-435ph

Table of Contents