Driver Installation; System Requirement; Installation; Important - Holux 236 User Manual

HOLUX GPSlim236 Wireless Bluetooth GPS Receiver Manual

7. Driver Installation

You can use any
except GR230-A2 USB cable. The following is the steps of installation GR230-A2
USB cable.

7.1 System Requirement

CPU: IBM, Pentium, or other compatible PC.
Memory: above 16 MB
System: Windows 98/Me/2000/XP

7.2 Installation

I. Copy entire
II. Connect GR-230-A2 USB connector to computer without
receiver. While the computer automatically starts the installation program,
please direct the driver to the

7.3 Important

Verify the COM port to start using your own navigation software.
I. Click <Start> menu, select → <Setting>, then enter→ <Controller>
II. After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector(COM & LPT)> and check the Virtual COM Port, which
was created by the USB driver.
Please note that the virtual COM port number might be different from every
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won't receive the satellite signal, because of the un-match
COM Port setting.
accessories data cable without installing driver
USB folder from CD to hard disk.
16
USB folder.
GPS