Optional Cable Accessory; Driver Installation; System Requirement; Installation - Holux M-1000 User Manual

HOLUX M-1000 Bluetooth GPS Receiver Manual
6.

Optional cable accessory

Option cable accessory is provided to meet customers' need, see table 1. With
the data cable connected, it can transmit data with PDA, NoteBook easily as the
G-mouse role.
Table 1
GR230-A2

7. Driver Installation

The following is the steps of installation GR230-A2 USB data cable.

7.1 System Requirement

CPU: IBM, Pentium II or above, or other compatible PC.
Memory: above 32 MB
System: Windows 2000/XP

7.2 Installation

I. Starts the driver installer from driver CD.
II. Connect GR-230-A2 USB data cable to computer. System will search new
III. Connect M-1000 GPS receiver with USB data cable.

7.3 Important

Verify the COM port to start using your own navigation software.
I.
II.
III. Select <Device Manager>.
IV. Find the < Connector(COM & LPT)> and check the Virtual COM Port, which
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won't receive the satellite signal, because of the un-match
COM Port setting.
This Manual: http://www.manuallib.com/file/2551106
Item
HOLUX USB data cable
hardware and install the driver automatically
Click <Start> menu, select → <Setting>, then enter→ <Controller>
After entering <Controller>, and select <System>.
was created by the USB driver.
Please note that the virtual COM port number might be different from every
Description
15
Note