Table of Contents
Advertisement
HOLUX M-1000B Bluetooth GPS Receiver Manual
6.
Optional cable accessory
Option cable accessory is provided to meet customers' need, see table 1. With
the data cable connected, it can transmit data with PDA, NoteBook easily as the
G-mouse role.
Table 1
Item
GR230-A2
7. Driver Installation
The following is the steps of installation GR230-A2 USB data cable.
7.1 System Requirement
CPU: IBM, Pentium II or above, or other compatible PC.
Memory: above 32 MB
System: Windows 2000/XP
7.2 Installation
I. Starts the driver installer from driver CD.
II. Connect GR-230-A2 USB data cable to computer. System will search new
hardware and install the driver automatically
III. Connect M-1000B GPS receiver with USB data cable.
7.3 Important
Verify the COM port to start using your own navigation software.
I.
Click <Start> menu, select → <Setting>, then enter→ <Controller>
II.
After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector(COM & LPT)> and check the Virtual COM Port, which
was created by the USB driver.
Please note that the virtual COM port number might be different from every
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won't receive the satellite signal, because of the un-match
COM Port setting.
HOLUX USB data cable
Description
15
Note
Advertisement
Table of Contents
