Optional Cable Accessory; Driver Installation; System Requirement; Installation - Holux M-1000C User Manual

HOLUX M-1000C Bluetooth GPS Logger Manual
6.

Optional cable accessory

Option cable accessory is provided to meet customers' need, see table 1. With
the data cable connected, it can transmit data with PDA, NoteBook easily as the
G-mouse role.
Table 1
Item
USB Cable

7. Driver Installation

The following is the steps of installation USB driver

7.1 System Requirement

CPU: IBM, Pentium III or above, or other compatible PC.
Memory: above 32 MB
System: Windows 2000/XP

7.2 Installation

I. Starts the driver installer from driver CD.
II. Connect USB data cable to computer. System will search new hardware and
install the driver automatically
III. Connect M-1000C GPS Logger with USB data cable.

7.3 Important

Verify the COM port to start using your own navigation software.
I. Click <Start> menu, select → <Setting>, then enter→ <Controller>
II. After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector (COM & LPT)> and check the Virtual COM Port, which
was created by the USB driver.
Please note that the virtual COM port number might be different from every
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won't receive the satellite signal, because of the un-match
COM Port setting.
USB to Mini-USB data cable
Description
17
Note