Driver Installation; System Requirement; Installation; Important - Holux M-1200E User Manual

HOLUX M-1200E Bluetooth GPS Logger Manual
3) In "setup" panel you can see "Hot Start"、"Warm Start"、"Cold Start"、which allow
you to re-acquisition of Ephemeris and Almanac. Basically the satellites are
always moving in the sky, if Ephemeris and Almanac data in GPS Logger can't
meet real satellites status upon you if GPS Logger is over 0.5 hour power off but
you are no longer in the previous position , it takes more time for the GPS Logger
to get GPS position fix soon. We suggest you can click "Cold Start" or "Warm start"
to re-acquisition. Or you can remove the battery for 3 seconds and reinsert it, this
operation is the same with "Cold Start".

Driver Installation

The following is the steps of installation USB driver

System Requirement

CPU: IBM, Pentium III or above, or other compatible PC.
Memory: above 32 MB
System: Windows 2000/XP

Installation

I. Starts the driver installer from driver CD.
II. Connect USB data cable to computer. System will search new hardware and install
the driver automatically
III. Connect M-1200E GPS Logger with USB data cable.

Important

Verify the COM port to start using your own navigation software.
(Fig. 6)
13