Optional Cable Accessory; Driver Installation; System Requirement; Installation - Holux M-1000 User Manual

HOLUX M-1000 Bluetooth GPS Receiver Manual
6.

Optional cable accessory

Option cable accessory is provided to meet customers' need, see table 1. With
the data cable connected, it can transmit data with PDA, NoteBook easily as the
G-mouse role.
Table 1
Item
GR230-A2

7. Driver Installation

The following is the steps of installation GR230-A2 USB data cable.

7.1 System Requirement

CPU: IBM, Pentium II or above, or other compatible PC.
Memory: above 32 MB
System: Windows 2000/XP

7.2 Installation

I. Starts the driver installer from driver CD.
II. Connect GR-230-A2 USB data cable to computer. System will search new
hardware and install the driver automatically
III. Connect M-1000 GPS receiver with USB data cable.

7.3 Important

Verify the COM port to start using your own navigation software.
I. Click <Start> menu, select → <Setting>, then enter→ <Controller>
II. After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector(COM & LPT)> and check the Virtual COM Port, which
was created by the USB driver.
Please note that the virtual COM port number might be different from every
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won't receive the satellite signal, because of the un-match
COM Port setting.
HOLUX USB data cable
Description
16
Note