Rgb Offset; Color Macros; Sound-Override; White Or Amber - Chauvet Obey 4 D-Fi 2.4 User Manual

RGB Offset

RGB Offest is a built-in color-fade program that will create a serial chase through products
1~4.
1.
2.
3.
4.
Sound-Active mode will function in RGB Offset mode.

Color Macros

These preset color macros have varying intensities.
1.
2.
3.
4.
5.
Color Macros will apply the same color to each product.
Sound-Active mode will not function while Color Macros are operating.
Sound-
This feature will work in RGB Fade, Auto, Chase, and RGB Offset modes and creates a
sound-activated show using the selected auto mode. Sound-Override can be triggered using
Override
the microphone instead of the <Speed Time> fader used for other multi-step modes:
1.
2.
The product will only respond to low frequencies of music (bass and drums).
Sound-Override will not function when the unit is in Preset Mode.
White
This all-white or all-amber operating mode can create a stable wash or spot for varying
lighting needs. The only functions that will affect these modes are Strobe-Override and
or Amber
Blackout.
1.
2.
Strobe-
This mode will produce flashes of light at regular intervals. These intervals are determined by
moving the dimmer fader.
Override
1.
2.
3.
4.
5.
6.
When in Strobe-Override, the Obey™ D-Fi™ 2.4GHz's other operating modes will not
function.
Page 10 of 13
Press <RGB Fade> and <Auto> at the same time.
Use the <Speed Time> fader to set the speed of chase.
Use the <Fade Time> fader to set the speed of the fade between colors.
Use the <Master Dimmer> to set the desired intensity of the light.
Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
Use the <Speed Time> fader to select the color combination desired.
Use the <Fade Time> fader to set the speed of the fade between colors.
Use the <Master Dimmer> to set the desired intensity of the light.
Use the <White Dimmer> to set the desired intensity of the white/amber LEDs.
Press <Sound> until the LED indicator lights.
Adjust the sound sensitivity using the Microphone Sensitivity Adjustment Knob
(<Sensitivity>).
Press the <Manual RGBW> button until the LED indicator lights.
Use the <White Dimmer> fader independently to get amber, use all faders to create
white.
Select one or more products with the Product Selection (<Fixture>) buttons <1>
through <4>. NOTE: Strobe-Override will only affect products that are selected.
Make sure the color faders are at positions above 1% for the strobe to function.
Press <Strobe> until the LED indicator lights.
Use <Speed Time> to select the speed of the strobe.
To cancel this mode for all products at once, double-tap <Strobe> until the LED
indicator turns off.
To cancel this mode for a single product, make sure <Strobe> is activated and <Fade
Time> is set to fully down. Then press <Strobe> until the LED indicator is off.
Obey™ D-Fi™ 2.4GHz User Manual (Rev. 1)