Offset Mode; Entering Offset Mode - Chauvet Lrgrnd 300E Beam User Manual

Offset Mode

Entering Offset
Mode
Pan
Tilt
Shutter
Dimmer
Color
Cyan
Magenta
Yellow
Gobo
R-Gobo
Prism
R-Prism
Frost
Legend 300E Beam User Manual Rev. 01f
The Offset Mode provides fine adjustments for the home position of all the moving parts in
the optical path as well as the pan and tilt movements. This way, when in their home
position, the moving parts do not show any border or reduce the light output.
1) Press <MENU> to enter the regular Menu Mode.
2) Press <ENTER> for more than three seconds to enter the Offset Mode (the Offset
Mode menu will show).
1) Select Pan and press <ENTER> (a pop up window will open).
a) Select the new value (-128~127).
b) Accept the new value.
1) Select Tilt and press <ENTER> (a pop up window will open).
a) Select the new value (-128~127).
b) Accept the new value.
1) Select Shutter and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
1) Select Dimmer and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
1) Select Color and press <ENTER> (a pop up window will open).
a) Select the new value (-128~127).
b) Accept the new value.
1) Select Cyan and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
1) Select Magenta and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
1) Select Yellow and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
1) Select Gobo and press <ENTER> (a pop up window will open).
a) Select the new value (-128~127).
b) Accept the new value.
1) Select R-Gobo and press <ENTER>.
a) Select the new value (-128~127).
b) Accept the new value.
1) Select Prism and press <ENTER> (a pop up window will open).
2) Select the new value (0~255) and press <ENTER>.
3) Return to the Offset Mode menu.
1) Select R-Prism and press <ENTER> (a pop up window will open).
a) Select the new value (-128~127).
b) Accept the new value.
1) Select Frost and press <ENTER> (a pop up window will open).
a) Select the new value (0~255).
b) Accept the new value.
Operation
-17-