Special Functions; Offset Mode; Entering Offset Mode - Chauvet Legend 230SR Beam User Manual

Operation
Color Reset
Gobo Reset
Zoom/Frost/Focus Reset
Reset All

Special Functions

Fixture Maintenance Timers
Fixture Defaulting

Offset Mode

Entering Offset Mode

16
1. Highlight Color and press <ENTER>.
a. Select YES to reset the color wheel and the CMY filters to their home
positions.
b. Accept the selected option.
1. Highlight Gobo and press <ENTER>.
a. Select YES to reset the gobo wheel to its home position.
b. Accept the selected option.
1. Highlight Zoom/Frost/Focus and press <ENTER>.
a. Select YES to reset the zoom, focus, and frost to their home positions.
b. Accept the selected option.
1. Highlight All and press <ENTER>.
a. Select YES to reset all moving optical parts and the moving head to their
home positions.
b. Accept the selected option.
From the Main Menu, highlight Special Functions and press <ENTER>.
1. Highlight Fixture Maintenance and press <ENTER>
(the current maintenance interval and remaining time will show).
2. To change the maintenance interval timer, highlight Interval and press <ENTER>.
a. Select the new interval 10~300h (in hours).
b. Accept the new value.
3. To reset the counter for the remaining time, highlight Remain Time
and press <ENTER>.
a. Select Reset Time to reset the timer or Exit to exit without resetting it.
b. Accept the selected option.
It is a good idea to use the Fixture Maintenance timer as a reminder to change the
lamp.
1. Highlight Factory Setting and press <ENTER>.
a. Select YES to reset the product to factory default setting or NO to exit without
resetting.
The Offset mode provides fine adjustments for the home position of all the moving parts
in the optical path as well as the pan and tilt movements. This way, when in their home
position, the moving parts do not show any border or reduce the light output.
1. Press <MENU> to enter the regular Menu Mode.
2. Press <ENTER> for more than 3 seconds to enter the Offset mode (the Offset mode
menu will show).
Pan
1. Select Pan and press <ENTER>.
a. Select the new value (-128~127).
b. Accept the new value.
Tilt
1. Select Tilt and press <ENTER>.
a. Select the new value (-128~127).
b. Accept the new value.
Legend™ 230SR Beam User Manual Rev. 3