Table of Contents
Advertisement
Other difficulties
Difficulties
The machine will not turn on.
The machine cannot print EPS data
that includes binary with the
BR-Script3 printer driver.
1
®
For Windows
7 and Windows Server
Printer properties, and Brother DCP-XXXX BR-Script3 if necessary
Suggestions
Adverse conditions on the power connection (such as lightning or a power surge)
may have triggered the machine's internal safety mechanisms. Turn the machine
off and unplug the power cord. Wait for ten minutes, then plug in the power cord
and turn the machine on.
If the problem is not solved and you are using a power breaker, disconnect it to
make sure it is not the problem. Plug the machine's power cord directly into a
different known working wall electrical socket. If there is still no power, try a
different power cable.
®
(Windows
)
You need the following settings to print EPS data:
a
®
For Windows
7 and Windows Server
Click the
(Start) button and then Devices and Printers.
®
For Windows Vista
and Windows Server
Click the
(Start) button, Control Panel, Hardware and Sound, and
then Printers.
®
For Windows
XP and Windows Server
Click the Start button, and select Printers and Faxes.
b
Right-click the Brother DCP-XXXX BR-Script3 icon and select
1
Properties
.
c
From the Device Settings tab, choose TBCP (Tagged binary
communication protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB interface, you cannot print
EPS data that includes binary. You can print EPS data at the machine via a
network. To install the BR-Script3 printer driver over the network, visit the Brother
Solutions Center at http://solutions.brother.com/.
®
2008 R2:
Troubleshooting
®
2008 R2:
®
2008:
®
2003:
B
87
Advertisement
Table of Contents
