Table of Contents
Advertisement
Error Message
Out of Memory
Out of Memory
Secure Print Data
is full.
Print Unable XX
(XX = Error Code)
Protected Device
Rename the File
Replace Parts
Drum
Replace Parts
Fuser Unit
66
Cause
The machine's memory is full.
The machine's memory is full.
The machine has a mechanical
problem.
The protect switch of the USB
Flash memory drive is on.
There is already a file on the
USB Flash memory drive with
the same name as the file you
are trying to save.
It is time to replace the drum
unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser
unit.
Action
Copy operation in process
Do one of the following:
Press Start to copy the scanned pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Add optional memory.
(uu Advanced User's Guide: Memory
board)
Print operation in process
Do one of the following:
Reduce the print resolution.
(uu Software User's Guide: Printing (for
®
Windows
) or Printing and Faxing (for
Macintosh))
Add optional memory.
(uu Advanced User's Guide: Memory
board)
Press Stop/Exit and delete the previously
stored secure print data.
(uu Software User's Guide: Secure Print Key)
Do one of the following:
Turn the power switch off, wait a few
minutes, and then turn it on again.
If the problem continues, call Brother
customer service for support.
Turn off the protect switch of the USB Flash
memory drive.
Change the file name of the file on the USB
Flash memory drive or the file you are trying to
save.
Replace the drum unit.
(See Replacing the drum unit uu page 48.)
Reset the drum unit counter.
(See Resetting the drum counter uu page 51.)
Call Brother customer service or a Brother
Authorized Service Center to replace the fuser
unit.
Advertisement
Table of Contents
