D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Seconds
Year
Month
Day
Time in HH MM SS
Time Zone and DST
The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following
screen.
The following parameters can set:
information.
Enter the current year, if you want to update the system clock.
Enter the current month, if you would like to update the system clock.
Enter the current day, if you would like to update the system clock.
Enter the current time in hours, minutes and seconds if you wish to
update the system clock.
Figure 4- 36. Time Zone and DST Settings Page
64