Removal Of Four-Way Valve Coil, Solenoid Valve Coil, Electronic Expansion Valve Coil And Thermistor - Daikin CTXS09GVJU Service Manual

SiUS12-814
1.6 Removal of Four-Way Valve Coil, Solenoid Valve Coil,
Electronic Expansion Valve Coil and Thermistor
Procedure
Step
1 Remove 1 screw of the
four-way valve coil.
2 Remove one screw of
the solenoid valve coil.
3 Remove the electronic
expansion valve coil for
each room.
4 Release the thermistor
presser spring, and
remove the discharge
pipe thermistor.
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit – 2MXS18GVJU
Points
Place the thermistor so that
its end comes up to the end
of the presser spring.
Be careful not to lose the
presser spring for the
discharge pipe thermistor.
183